DROSERAMS

       Machinetools

High performance multifunctional zinc free oils for machine tools.

l Machine tool slide ways under all conditions of speed and load (grades 68 to 320).

l Hydraulic circuits for hydraulic pumps and motors (grades 32 and 46).

l Gear boxes and feed mechanisms of all types with or without wet electro magnetic clutches (grades 68 to 320).

l High speed machine spindles (grades 5, 10, 15 and 22 ) and very high speed (grade 2).

l Particularly suitable for centralized lubrication systems.

l  One single comprehensive range of lubricating products for all parts of machine tools (hydraulics, slides, gears).

l Simplification of storage and maintenance, cost reduction.

l Viscosity grades 68 to 150 are also well suited to cold heading applications.

l ISO 6743/2  : FD2 ; FD5 ; FD10 ; FD 22 ; FD 32

l ISO 6743/4  : HG32 ; HG46

l ISO 6743/13 : GA68 ; GA100 ; GA150 ; GA220 ; GA320

l DIN 51502    : CGLP46 ; CGLP68 ; CGLP100 ; CGLP150 ; CGLP220 ; CGLP320

l DIN51517 Part 3 , CLP 46 ; CLP 68 ; CLP 100 ; CLP 150 ; CLP 220 ; CLP 320

l CINCINNATI MACHINE : P65-P62-P47-P50-P53-P45

l  Excellent extreme-pressure properties

l Excellent anti-stick-slip properties.

l Strong stickiness grades 68 to 320.

l Verylow coefficient of friction.

l Antioilmist properties.

l High viscosity index.

l Total compatibility with seals.

l Low pour point.

l Very good foaming resistance.

l Very good oxidation resistance

l Very good protection against rust

l Very good anti-wear properties.

l Good filterability.

Above characteristics are mean values given as an information.

TOTALLUBRIFIANTS

Industrie & Spécialités

07-12-2010 (supersedes 12-03-2010) DROSERA MS

1/1

This lubricant used as recommended and for the application for which it has been designed does not present any particular risk.

A material safety data sheet conforming to the regulations in use in the E.C. is obtainable via your commercial adviser www.quick-fds.com.