PNEUMA 46 - 68 - 100 - 150
Pneumatictools
Mineral oils for pneumatic tools.
Pneumatictools l PNEUMA are formulated from high quality base stocks and specific additives.
l Meet the requirements of pneumatically operated rock drills lubrication in underground and surface mining operation.
l ISO 6743/11 Class P
Operatingcostsavings
l High impact strenght due to the extreme pressure additivation preventing the equipment wear.
l Adhesive and emulsifiable properties to drain increase to tools lifetime water off and maintain continuous oil film.
l Antirust to protect the equipments and increase their lifetime.
l High tackiness reducing oil mist pollution and oil consumption.
TYPICAL CHARACTERISTICS |
METHODS |
UNITS |
PNEUMA |
|||
46 |
68 |
100 |
150 |
|||
Density at 15°C |
ISO 3675 |
kg/m3 |
878 |
888 |
889 |
892 |
Viscosity at 40°C |
ISO 3104 |
mm2/s |
46 |
68 |
100 |
150 |
Viscosity index |
ISO 2909 |
- |
109 |
102 |
102 |
101 |
Flash point (open cup) |
ISO 2592 |
°C |
> 220 |
> 220 |
> 220 |
> 220 |
Pour point |
ISO 3016 |
°C |
- 30 |
- 30 |
- 30 |
- 30 |
Above characteristics are mean values given as an information.
TOTALLUBRIFIANTS
Industrie & Spécialités
09-03-2011 (supersedes 18-05-2010)
PNEUMA 46-68-100-150
1/1
This lubricant used as recommended and for the application for which it has been designed does not present any particular risk.
A material safety data sheet conforming to the regulations in use in the E.C. can be obtained from your local commercial adviser or down loaded from www.quick-fds.com.
Ông Giang Tử - 0913.329.033 |
Bà Nga - 0903.228.574 |
Trang web hiện có:
38 khách & 0 thành viên trực tuyến